Service Tip: Which SMA Inverters Support Modbus?
(Update February 3, 2022):
The current overview of which inverters support Modbus can be found – subdivided by product type – in the download area of the product page under “background knowledge”.
(Update January 9, 2018):
Many customers ask us whether their inverter supports Modbus and where exactly they can check this. Our product management has prepared a detailed list about this topic.
You can find it here:
1. Go to the SMA download page for the Modbus protocol interface
Download the Modbus specification (ZIP file) there.
Please note that you may see a different version number if the document has been updated since this was published.
2. After you extract the ZIP file, you will find two files.
You can find all the devices that support Modbus in the device-specific list (Excel), under “SMA Device Types.”
|SMA Device Types
Sunny Boy ID
|Sunny Boy Storage|
3. If you require further information, please click on an individual tab.
You will find the relevant details about the device types and firmware that are supported there.
Do you have any further suggestions for the Modbus interface? Please feel free to add them to the comments section.
Please find more information about Modbus on our website SMA Developer.
SMA don’t have organize they support, LATAM is the great forgetted?
Please check our Download-area mentionned earlier for further support, thank you.
Not work the links to the zip file for modbus i have a SB7.0-1SP-US-41 and want integrate via modbus tcp. Any information?
Please check the US-Download area for further support (“Background Knowledge”).
Same comment as Eric, the file cannot be downloaded. Is there an explanation on how to enable Modbus on a 3600TL-21? Port 502 is closed on mine.
Please check our product site for more information.
You will find the zip-file in the download-area.
The link (http://www.sma.de/en/products/monitoring-control/modbus-protocol-interface.html) doesn’t actually give access to the Zip file with the spreadsheet, etc. It only allows downloading of the PDF document.
The error should be corrected by providing links on that download page to allow retrieval of the spreadsheet file in addition to the PDF file.
We have customers with installed Sunny Boy SB5.0-1 AV-40 model and wanting to build a smart energy monitoring solution using either Modbus RTU or TCP. How do we check if these communications protocol is supported with this inverter model?
Does anyone know where to enable Modbus IP protocol in the Webconnect module, the installation manual states that it’s in the settings tab of Sunny explorrer but i cannot locate?
Please sign in on our Online Service Center.
Is the new SI8.0H-12 support modbus via Cluster Controller? We seen to have issue of reading the value from the address. However, we do not have problem with SI8.0H-11. Thanks
Do STP17000TL-10 inverters need the Speedwire Data module? Does Modbus work with 485 Data modules?
That article was superb, I am impressed with your thoughts. I got the best information from this site of the blog, It’s very helpful to all and us. Thanks for sharing this post.