First PV Diesel Hybrid System in the Megawatts Goes into Operation

Paul Robert Stankatby Paul Robert Stankat (guest post), , 66 Comments
Photovoltaic systems can substantially reduce the operating costs of industrial plants – like the standalone power system, which SMA equipped with the required fuel save controller, in this mine in South Africa. Diesel generator output: 2 x 800 kVA; photovoltaic output: 1 MWp; savings according to SMA: up to 450,000 liters of diesel per year.

The first PV diesel project in the megawatts was commissioned in Thabazimbi in November 2012 and, as a future development engineer, I was granted the opportunity of being present for the commissioning of this flagship project.

Rising diesel prices naturally result in high costs for everyone. However, this is especially true for industrial large-scale consumers in off-grid regions. Industrial companies in sunny regions can counter this trend with solar energy by integrating a PV system into a diesel system. The SMA Fuel Save Controller offers a solution for industrial plant operators to minimize fuel consumption while significantly reducing CO2 emissions. SMA completed its first project combining diesel generators and PV systems at a chrome ore mine in South Africa.

 

The project: a chrome mine in South Africa

Thabazimbi, Limpopo, South Africa, November 17, 2012, 2 p.m. – nothing as far as the eye can see, except for grass and bushes. The area is virtually unpopulated.   The only thing disturbing the idyllic setting is a loud, rattling motor sound which can be heard long before anything can be seen. Two 800 kVA diesel generators thunder away, providing electrical power for a young chrome mine. The mine is located in an area too remote to be supplied by a utility grid.  Therefore, conveyor belts and mining equipment are powered using diesel generators. The quicker the mine operates, the more expensive it is to run, and the more CO2 emissions it produces.

 

Solar Saves Diesel

Suddenly – as if at the push of a button – the deep thundering of the generator dwindles to a quiet hum. The power provided by the diesel engine is reduced by almost 90 percent within seconds. In conventional stand-alone diesel grids this happens frequently when a large load is switched off or another diesel generator is connected. But not in this case. Instead, photovoltaic energy has actually been fed into the system with the simple push of a button – controlled by the SMA Fuel Save Controller prototype. It controls the 1 MWp system with 63 SMA Sunny Tripower 17000TLs so that a majority of nominal system power can be covered by PV energy without compromising system stability in the process.

 

“Luckily, We Were Only Sweating Because of the Heat”

The commissioning of the pilot project went smoothly. Luckily, we were only sweating because of the heat. The only problems that came up were of an organizational nature as the work sequences in Germany and South Africa needed to be coordinated and carried out with various project partners. With regard to the technology, however, everything went according to plan. The SMA Global Support Team provided support in the commissioning of the Sunny Tripowers, and the service employees at our newly founded SMA subsidiary in Centurion, South Africa, provided valuable on-site assistance. Without them, we probably wouldn’t have even been able to find the mine so easily.

 

Huge Potential for PV Energy Worldwide

There is great potential for the use of PV systems in off-grid diesel systems. In 2011, nearly 50 GW of diesel generated nominal power were sold worldwide, including approximately 40 percent running in industrial stand-alone grids, primarily in grid-remote regions with high levels of solar irradiation.   If the price of diesel is above US$1/liter, the integration of a PV system into the stand-alone diesel grid would have already have been amortized after only a few years. A PV diesel hybrid system ensures the stability and even a reduction in the levelized cost of electricity generation.

 

Valuable Experience for Future Projects

These advantages have convinced the mine operators about the power of PV diesel hybrid systems.  Over the next few months the system will provide us with a lot of data which we’ll be able to use for future projects. In this way, we can further optimize the Fuel Save Controller – which will be available in a few months – and adjust it to the needs of ongoing operations.

 

Find more information in our press release.

5/5 - (1 vote)
66 Comments
  1. Eng ZIAD ALABDULLAH
    Eng ZIAD ALABDULLAH says:

    We are technology exper company
    We had worked at soler system in ksa
    At ryiadh and khouber into 100 kw
    Now we had offer for connect hybrid system soler in mall the total capacity is 1.5 maga watt we temperature is between 20/50 c in Saudi Arabia Riyadh we utility pwoer supply is available we need frequency 60 hz 3 phase 400 volt we need technical support because we did not work at that capacity
    Eng ziad

    Reply
    • Anke Baars
      Anke Baars says:

      Hi,
      Thanks for your request. My colleague will contact you to discuss your topics.
      Kind regards,
      Anke

      Reply
  2. Amitabh Srivastava
    Amitabh Srivastava says:

    Hello, we want to develop a solar plant in Africa to minimum fuel consumption in 8 MW DG station (6 DG sets of various capacities) supplying power to a standalone city grid, can you help?

    Thanks

    Reply
    • Christian Höhle
      Christian Höhle says:

      Hi Amitabh,

      it sounds like a perfect match for our Fuel Save Controller 2.0 🙂
      You find more information here: Fuel Save Solution – Info Package

      If you need help on planning a Fuel Save Solution, please send an email to FuelSaveSolution@sma.de with a detailed description of your project containing:
      – Gensets (Nominal power of each genset, Genset controller if used)
      – Load (max / min)
      – Planned solar peak power (if already determined – if not you may use Sunny Design to find out an optimal solar power match for your project)

      Sunny regards,
      Christian

      Reply
  3. Ahmed A. D. Gh
    Ahmed A. D. Gh says:

    I’m working on project with the same concept, i’ve joined the project in the middle of the planning phase. i need more technical details or SLD of a previous operating project to get a closer idea and more details of how to install and commission the system. By the way the system is 500kW system with grid+gen sets.

    the gen sets synchronizing panels are not compatible as far as i know with the FSC.

    Best Regards,
    Ahmed

    Reply
    • Anke Baars
      Anke Baars says:

      Hi Ahmed,
      please put your question in here.
      My colleagues will get back to you as soon as possible.
      Thanks and best regards,
      Anke

      Reply
  4. masanta kumar sahu
    masanta kumar sahu says:

    G Naresh

    May 19, 2015 at 07:11
    .

    Hi
    We are planing for a 1 MW solar power plant for one of our client.
    as it a remote area, we want to synchronize the plant with DG.
    How to select the minimum capacity of DG for synchronization so that we utilize maximum solar power.
    also if the load is lower than the solar generation at day time then how i have to design the system to control generation of solar power or to use the excess power?
    here we dont want to use the battery for store the excess power.

    Thank you
    basanta kumar sahu

    Reply
    • Leonie Blume
      Leonie Blume says:

      Hi,
      The selected minimum capacity of DG depends on the maximum load. The DG must be able to provide the complete load. The Fuel Save Controller (FSC) increases the PV penetration level up to 60% (without batteries). With batteries the PV penetration level can be higher.
      The FSC offers reliable control and monitoring of all PV inverters saving fuel and allowing stable operation of the DG (isolated grid). Excess energy could not use without batteries. If necessary the FSC regulate the PV power to protect the DG.
      Best regards
      Leonie

      Reply
  5. Devesh Bajpayi
    Devesh Bajpayi says:

    Namaskar,

    We are Renewable Energy EPC company from central India. We have a project inquiry for setting 300 KW Grid Tied PV Power Plant with facility to run the PV Power plant along with Diesel Generator. We like to use Sunny Tripower 20000TL With ReneSola Virtus II 250w/300W panels.
    Kindly give us solution for following things.
    How much capacity of DG Require for reference power instead of Grid power outage.

    Regards,
    Devesh Bajpayi
    M – +91 98264 33330
    Bhavya Renewable Energy

    Reply
  6. G Naresh
    G Naresh says:

    Hi
    We are planing for a 2.5 MW solar power plant for one of our client.
    as it a remote area, we want to synchronize the plant with DG.
    How to select the minimum capacity of DG for synchronization so that we utilize maximum solar power.
    also if the load is lower than the solar generation at day time then how i have to design the system to control generation of solar power or to use the excess power?
    here we dont want to use the battery for store the excess power.

    Thank you
    G Naresh

    Reply
    • Leonie Blume
      Leonie Blume says:

      Hi

      Thanks for your request. I asked my Indian colleagues to answer you as they are responsible for your company.

      Best regards
      Leonie

      Reply
  7. Luis Cruto
    Luis Cruto says:

    Hi Matthew,

    I was browsing the net and i saw this site and read your solar farm on-grid system but connected to a generator set. As of now there is already an approved proposal for us to supply a 1.5 Megawatt solar energy in an island and we don’t have an experience in a big scale solar setup and design. The first design that we made is off grid. Because there is no electricity in the island, offgrid system comes first in our mind but there will be lots of batteries too. Your on-grid type using a diesel generator synchronized to each other will be a great option. How do you think you can help us? You can also provide all the materials needed and send us quotation so we can talk with the board of directors.

    Thank you.

    Luis

    Reply
  8. Balasaheb Zarekar
    Balasaheb Zarekar says:

    would you please advise for the ideal configuration for a combined hybrid systeam using PV , state electricity supply & D. G. power backup for my new industrial setup @ 0.5 MW load in India ( Maharashtra state, Pune Distric )

    Reply
    • Horst
      Horst says:

      Hello any many thanks – I have contacted our team in India and they will contact you within the next couple days via email.

      Best regards
      Horst

      Reply
  9. Tarek Rahman Khan
    Tarek Rahman Khan says:

    Hi,

    Very helpful article. This is tarek from Bangladesh working in Rahimafrooz Renewable Energy. We are using SMA products regularly. And we are going to do some MiniGrid projects in Bangladesh with SMA products.

    A picture shows here inverters are installed under the panel. I just want to get sure…is it ok in a country where rainy season continues for 2 months. I know the inverter got IP65 protection. And which type of installation do you prefer…inverters near to the PV Panels like the picture shows or All equipment in a distant equipment room…and the reason…

    Have a nice day.

    Tarek
    Rahimafrooz
    Bangladesh

    Reply
    • Leonie Blume
      Leonie Blume says:

      Hi Tarek,

      As you said our Sunny Tripower has protection class IP65 and is therefore waterproof.
      So it’s no problem to install the devices outside. Just make sure they’re installed under the panels to give shade. Otherwise they heat up to much and can’t perform as they should do.
      If you have further questions don’t hesitate to contact us via social media@sma.de.

      Best regards
      Leonie

      Reply
  10. Adboul Diawara
    Adboul Diawara says:

    Hello Gerrit.

    I did not receive any email unfortunately. i would really love to have a contact in the technical department at least in order to work on this project since we want to use SMA products. Could you please verify this for me or redirect me to someone that can assist in the design of this system.
    That would be greatly appreciated. Than you.

    Reply
  11. Chris Angeconeb
    Chris Angeconeb says:

    I work for Clarida which is an EPC in Canada. There are proposed mining projects in isolated (off-grid) areas of northern Ontario where we would like to propose hybrid solutions. We would like additional technical information on your product. I also have a question on whether or not you believe this system could work for isolated Indigenous communities that rely on diesel gensets for their electrification.
    Thanks,
    Chris

    Reply
    • Leonie Blume
      Leonie Blume says:

      Hi Chris,

      Thanks a lot for your request. Due to the bank holiday in Germany we will get back to you at the beginning of the week.

      Best regards and have a nice weekend
      Leonie

      Reply
      • Abdoul Diawara
        Abdoul Diawara says:

        Hello Leonie i have already sent you a linkedin invitation. I have created a company Called EnerQI Solution and i have just received a project similar to this one for a remote holiday resort in Mauritania West Africa. I would love to have a contact at SMA with whom i can work on this. Please contact me as soon as Possible. I also would like to know what are the requirement for being your representative in the region. Thank you very much i am looking forward in collaborating with you

      • Gerrit Naß
        Gerrit Naß says:

        Hello Abdoul,

        I’ve already passed your contact information to our sales specialist for new markets. She is going to contact you as soon as possible.

        Best regards,
        Gerrit

  12. Mohammad Sibbir Ahmed
    Mohammad Sibbir Ahmed says:

    Hi,
    Is there any Reference on EPC of the 2-3 MW (Solar 1 MW + DG 2 MW) EPC Experience Company, And the plant should be running fro last 2 months Successfully, who may help me for the Technical qualification on the Tender BID>

    Reply
  13. Nuno Fernandes
    Nuno Fernandes says:

    Hello,

    I work for a Portuguese company currently thinking of implementing a similar system to the one SMA has installed in the South African mine.

    This is still a work in progress but i wanted to know the power limits of this PV+Genset hybrid system.

    Thanks in advance for your answer and congrats on achieving success with your PV Hybrid systems.

    Regards,
    Nuno Fernandes

    Reply
    • Henrik Schenck
      Henrik Schenck says:

      Hello Nuno Fernandes,

      Thanks for your interest.
      We’ll check with our genset experts on Monday
      and will get back to you as soon we got an answer.

      Thanks
      Henrik

      Reply
  14. Anjal
    Anjal says:

    Hi,
    We are a looking for a similar system here in Nepal. A factory runs 2* 1.75 MVA generators 24*7. It’s completely isolated and there’s as much space to be had. Could you please put me in touch with your designers ? We need to understand more about the fuel saver and its operation.
    Thanks,
    Anjal

    Reply
    • Leonie Blume
      Leonie Blume says:

      Hi Anjal,
      Thanks a lot for your request. My colleague will contact you directly via email and send you further information.
      Best regards
      Leonie

      Reply
      • Leonie Blume
        Leonie Blume says:

        Hi Anjal,
        Sorry for that. My colleague just promised me to get in touch with you as soon as possible.
        Did she already emailed you?
        Best regards
        Leonie

  15. Muhammad Arhum Gulzar
    Muhammad Arhum Gulzar says:

    Can you please clarify. The PV + DG hybrid solution basically works like an On-Grid System but with DG and reduce the fuel cost by sharing the load?

    Also can you please clarify if batteries are required for such systems to work or the system can work without batteries?

    Reply
    • Gerrit Naß
      Gerrit Naß says:

      Dear Mr. Gulzar,

      thank you for your interest in our hybrid solutions.

      In a SMA Sunny Island system the Sunny Island inverters are usually the superior grid manager and supply voltage and frequency. Therefore the application of batteries is required. The approach of the SMA Fuel Save Solution for Industrial Hybrid Energy Systems is different. Here, the genset control system remains the superior system supplying voltage and frequency. In such systems we are often talking about several Megwatts of power supply. Thus, the preferred approach here is to have genset power constantly running and offsetting a significant amount of fossil energy with PV energy and optional battery storage.

      This means you are right, the PV system connects to an existing grid. However, PV inverters in such application are required to come with a robust design for harsh environments, a high tolerance for wide voltage and frequency ranges and integrated management functions for weak grids. After surpassing a certain PV penetration (approx. 20%) additional control is required in order to guarantee a stable and reliable system operation. Obviously, in remote locations a reliable power supply is of highest priority. The SMA Fuel Save Controller allows a PV penetration of up to 60%. It stands for an intelligent and fast interface between load, genset and PV inverters and comes with several operation modes for maximum compatibility and system stability. More detailed information can be found in this Technical Information: http://files.sma.de/dl/20580/FSC10_System_TI_en_10.pdf

      For further increase of the system efficiency and if the operator wants to use PV energy also during night, an optional storage system can be integrated seamlessly into the SMA Fuel Save Solution. Battery storage power can compensate fluctuactions in load and irradiation, providing spinning reserve and facilitating optimized genset operation. In addition to that it can be used for power smoothing.

      Don’t hesitate to contact us in case of further questions.

      Best Regards
      p.p. Stefan Tait

      Reply
  16. Leon Sun
    Leon Sun says:

    Hi, Paul!

    Congratulations first!
    I am an engineer from China and working on a Hybrid Power Plant recently. It is a same mode with 1.5MW PV + 1.0MW DG but the owner prefer PV have priority.
    But I have some questions about this kind of project and hope get some information from your side.
    Could you contact me via Email and we talk about some more detail?

    Thank you and Regards.
    Have a nice day!

    Leon

    Reply
  17. jane
    jane says:

    dear Leonie Blume
    what kind of your inverters work properly with secure power supply?
    I want an inverter which works with secure power supply and have 220 V output?

    Reply
  18. Matthew
    Matthew says:

    Hello Leonie Blume,
    I leave a inquiry on June 27, 2013. But till now no email or futher contact. Please, we need your help, customer in on the way coming.
    Thanks
    Matthew

    Reply
    • Leonie Blume
      Leonie Blume says:

      Hi Matthew,

      Due to the weekend it was not possible to answer your request yet. But I will remind my colleagues again to answer you as soon as possible.

      Best regards
      Leonie

      Reply
  19. Thomas
    Thomas says:

    Hi SMA,

    I like to learn more about hybrid solutions that combines Heavy Fuel Generators instead of Diesel. I was wondering whether you could provide information especially on the technical challenges. Your input is much appreciated.

    Regards

    Thomas

    Reply
    • Leonie Blume
      Leonie Blume says:

      Hi Thomas,
      Thanks a lot for your request. We will contact you directly via email.
      Regards
      Leonie

      Reply
  20. Yann von sengbusch
    Yann von sengbusch says:

    Hi paul,

    Good article.

    I am currently in Jakarta with an EPC company. Our client are mainly from Indonesia, Australia and Canada base with project in Indonesia, Australia, Korea, Philippines and Africa. Currently we have one Copper and Gold Project in DRC.

    We want to compare power generation by diesel GenSets vs a solar PV/GenSet Hybrid solution on heavy duty applications with requirements above 1 MW ( up to 10MW ). Typical application evaluated are open pitch mines, in remote locations. Mostly off-grid applications.

    Would it be possible to have more technical information as well as any other informations (OPEX, CAPEX,FIT etc..) that may be relevant to such a project

    I’m looking forward to hearing from you.

    Yann von Sengbusch

    Reply
    • Leonie Blume
      Leonie Blume says:

      Hi Yann,

      Thanks a lot for your request. We will send you further details via email.

      Best regards
      Leonie

      Reply
  21. Akram Rushdi
    Akram Rushdi says:

    Would you please advise for the Ideal configuration for a combined Hybrid System using PV; Winde generation along with Genset; with max power of 1.2 MW

    Reply
    • Leonie Blume
      Leonie Blume says:

      Hello,
      Thanks a lot for your request. We will contact you directly via email.
      Best regards
      Leonie Blume

      Reply
  22. Muhammad Amjad Khan
    Muhammad Amjad Khan says:

    Hello Mr. Paul,

    First of all congratulation for your effort & work for Solar + Diesel Hybrid System.

    In Kingdom of Saudi Arabia, Energy Glow has been providing solar energy solutions for domestic, commercial & industrial applications since last 3 years. We usually receive many inquires for such hybrid systems where fuel transportation is not easy, or extension of grid is night mare due to bumpy terrain structure.

    If we can really skip battery bank from Solar + Diesel Hybrid system then we have very good market for such clients (25KW-5MW). Please forward me more details about the solar & diesel hybrid system. Is there any limit or we can extend the system in MWs i.e. 2-5MW?

    Waiting for your quick response.

    Muhammad Amjad Khan
    Manager for Technical Services
    amjad@solarenergyglow.com
    http://www.solarenergyglow.com

    Reply
    • Jannis Rudzki-Weise
      Jannis Rudzki-Weise says:

      Thank you for your question, Mr. Amjad Khan. We will get back to you in Monday. Have a nice weekend.

      Best regards,
      Jannis

      Reply
  23. solarsaviour
    solarsaviour says:

    Hallo SMA,

    ich glaube der Hybrid Markt würde gerne wissen, welcher vorreitende EPC euch als Produktlieferant gewählt hat.

    MfG

    Solarsaviour

    Reply
  24. Marco Ramirez
    Marco Ramirez says:

    Hi Paul.

    I am very interested to discuss with you whether this bio hybrid can be utilised within Materials Handling? As I’m sure you will be aware, our industry operates large conveyor belt systems and we are always looking for alternative operational methods as a greener approach. Be great to hear your thoughts?

    Many thanks
    Marco

    Reply
    • Leonie Blume
      Leonie Blume says:

      Hi Marco,
      Thanks for your request. We will get back to soon you via email.
      Best wishes
      Leonie

      Reply
  25. Paolo Laurenti
    Paolo Laurenti says:

    Hi Paul,
    very interesting article. We are working in India and we have a lot of opportunity in this sector due to grid instability and high cost of energy produced by genset. It’s possible to have more technical details about SMA solution in particular do you use also the frequency to control the PV inverter active power
    Thanks

    Reply
    • Leonie Blume
      Leonie Blume says:

      Hi Paolo,
      Thanks for your comment. My colleagues will get back to you as soon as possible via email and send you more technical data.
      Best wishes
      Leonie

      Reply
  26. Sampat Dhoot
    Sampat Dhoot says:

    Hi Paul,
    congratulations !Currently I am studying Energy Systems at FH Aachen University,Germany.I am very much interested to work on PV+Diesel Hybrid systems.Is it possible get an opportunity to work on similar kind of projects?Waiting for your reply.
    Best Regards,
    Sampat

    Reply
  27. Paul Robert Stankat
    Paul Robert Stankat says:

    Hi Lucas,

    Thanks for your request.
    We will get in touch with you via email at the beginning of next week.

    We are looking forward to contact you.

    Best regards,
    Paul

    Reply
  28. Lucas Abboud
    Lucas Abboud says:

    Hello Paul,

    Congratulations for this project.

    We’re currently searching for a similar solution PV+Diesel in middle east.
    The only solution we received today requires the use of batteries.

    The solution you propose is very very interesting. Can you please contact me asap to discuss.

    Best regards,

    Lucas

    Reply
  29. Paul Robert Stankat
    Paul Robert Stankat says:

    Hi Don,

    Thanks for your comment.

    One of the key challanges in integrating large amounts of PV into a diesel island grids is to make sure that you don’t let more PV into the system than your current load. So you need to find a way of throttling down the PV output power. If your loads varies fast, you also need to do this really fast. Another key issue lies in the reactive power management which is supported by SMA inverters and the SMA Fuel Save Controller.

    The SMA Fuel Save Controller is a PV-plant controller which analyzes the load of the grid and the loading of the GenSets and the PV-plant. According to its internal logic, it computes the optimum amount of PV to be fed into the island grid by still meeting stability criteria like reverse power protection and base loading of the GenSets.
    In order to easily fit into the SMA Fuel Save Concept, the Generator Controls should support communication over Modbus/TCP. If that is not possible, because the Generators are very old-fashioned or they are not equipped with Generator Controls or they run on manual mode, we provide a simple solution by gathering the required measurements using an additional Data Acquisition Module.

    At the moment, we are offering a load optimization logic of the SMA Fuel Save Controller in order to not throw away accessibly PV power. In further applications, storages will also be implemented.

    Best wishes
    Paul

    Reply
    • mohamed
      mohamed says:

      Paul Robert Stankat please contact me to discuss a 1MW similar project in the Egyptian desert.
      BR
      eng.mohamed.seliman(at)gmail.com

      Reply
      • Henrik Schenck
        Henrik Schenck says:

        Hi Mohamed,
        thanks for your comment. We’ll get into direct contact with you asap to discuss details.

        Best regards,
        Henrik

    • dung tran quoc
      dung tran quoc says:

      Hi Paul,
      I’m Dung Tran Quoc from Tuan An Corporation. My company was located in VietNam and My specialisation is manufacturing and trading electrical equipments, solar equipments.
      At present, I am interested in 3-MW scale grid-connected solar photovoltaic power plant. So ,we want to know, how do you assess about our project ? Which optimal solution for this project to get efficiency highest and payback period shortest ?
      I’m looking for the supplies who can supplies equipments which used for solar photovoltaic power plant
      Pls kindly let me know the prices of all equipment for our project .
      Our project is “3-MW scale grid-connected solar photovoltaic power plant, with island Grid specifications : Voltage 22kV, Frequency 50Hz by Diesel generator, total capacity 2,5 MW .
      Estimated distance to substation/ : 500 m
      grid-connection point
      Nearest City or Village: : Vung Tau city, Viet Nam
      Will the system be connected to the : Utility grid by diesel generator
      Utility grid (grid-feeding system)?
      What will the energy be used for? : Sell to the grid
      I’m look foward to hearing from you soon.
      Thanks and best regards,

      Dung Tran Quoc ( Tuan An Corp.)
      Department : project manager
      71 Ten Lua Street, Binh Tan District, Ho Chi Minh City, Viet Nam
      Email contact : Project-mng@tuanan.com

      Reply
      • Leonie Blume
        Leonie Blume says:

        Hi Dung Tran Quoc,
        That sounds very interesting, thanks for your request.
        We will contact you via email.
        Greetings from Germany
        Leonie

  30. Don
    Don says:

    Congratulations Paul!

    Potential of PV+Diesel is huge!

    We have known of several Wind+Diesel projects, what according to you are the specific challenges that are different about integrating Solar+Diesel systems, apart from the obvious differences in energy profile thought the day.

    What is inside the SMA Fuel Save Controller and does it work with any Generator in the field or does it need some engineering effort to coordinate controls.

    Is there some kind of storage or you let the excess PV power bleed out to control reverse flow into generator?

    Reply
    • Mati Eckstein
      Mati Eckstein says:

      Hello Paul,

      This is Mati from Israel.
      I already installed few PV plants using SMA inverters.
      Currently I have many many clients who operates off-grid systems using only 1 Diesel Generator per location from 50-300 KVA (without batteries at all).
      This kind of solution you described here, in your great project looks very similar to our needs here.
      I have two questions:

      1. In case I am sure the loads are always exceeds my generator minimum output power, do i still need the SMA Fuel Save Controller?
      2. In case you think I do need it, can someone from your team get back to me by email to discuss further details?

      Thank you very much in advance,
      Mati

      Reply
      • Leonie Blume
        Leonie Blume says:

        Hi Mati,
        Thanks a lot for your request.
        We will contact you next week via email, OK?
        Best wishes to Israel 🙂
        Leonie

    • Matthew
      Matthew says:

      Hi Paul,
      This is Matthew from China. We are a EPC compay,we ever built on-grid systems with your STP 15000TL grid-tied inverters, now inverters working perfectly.
      Thing is now our businesses are expanding, domestic and oversea maket. A lot inquiries from factory owners without grid or with bad grid. Your hybrid solutions are perfect reach these requirements. But before we give these clients, first we should give them a efficiency analysis between PV+BATTERY+GENERATOR and GENERATOR ONLY.
      On hand, we have a inqury from a factory owener in Yemen. The owner will visit us early next month. We know SMA has this kind hybrid solution, so I study on your webstite hope can get some help.
      1. Load: 360KW , 3phase 380V/50Hz (machines and office equipment, ligthing…)
      2. client want solar system working only during daytime
      3. he only has one generator, 400-500KVA I guess, not utility grid.
      4. fuel cost is $1700/month
      Accoring to your experiences, could you please send us a rough efficiency analysis and solution to show him it worth to build this system.
      By the way, is it possible we purchase directly from you, not agent in China? We want to reduce cost and delivery time.
      Thanks

      Reply
      • Leonie Blume
        Leonie Blume says:

        Hi Matthew,

        Thanks a lot for your request. The project sounds very interesting.
        My colleagues will contact you directly via email to discuss the details.

        Best regards
        Leonie

Leave a Reply
Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published.*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>