{"id":114082,"date":"2020-08-24T14:50:53","date_gmt":"2020-08-24T12:50:53","guid":{"rendered":"https:\/\/www.sma-sunny.com\/?p=114082"},"modified":"2020-08-24T14:53:06","modified_gmt":"2020-08-24T12:53:06","slug":"how-forecast-based-charging-works","status":"publish","type":"post","link":"https:\/\/www.sma-sunny.com\/en\/how-forecast-based-charging-works\/","title":{"rendered":"How forecast-based charging works"},"content":{"rendered":"

Thanks to the SMA “forecast-based battery charging” feature, PV system operators can generate higher PV yields and also lengthen the calendar service life of batteries. With our checklist, you can configure your system in Sunny Portal accordingly, ensuring that<\/strong> no valuable solar power is lost in the future while also extending the service life of your devices. <\/strong><\/p>\n

Is your battery not fully charged despite bright sunlight? If you\u2019re using SMA\u2019s “forecast-based charging” feature, there\u2019s no need to worry because you can rely on the intelligent charging and discharging of the battery. A battery that is not fully charged is part of this intelligent charging feature and is quite intentional. The Sunny Home Manager 2.0<\/a> automatically controls the charging and discharging of energy in the battery in such a way that the system does not need to be curtailed. It also learns the consumption habits of your connected home appliances and links them intelligently to the PV generation forecast using location-based meteorological data. This means that the energy manager always knows how much energy is available when and where it is needed. All connected (home) appliances are then supplied with cost-effective and sustainable solar power whenever possible. As a system operator, you can sit back and relax. Storage systems with SMA battery inverters<\/a> and electric mobility applications with SMA EV Charger<\/a> benefit from this intelligent control behavior.<\/p>\n

Please note:<\/strong> The installer password is required for the settings for forecast-based charging in Sunny\u00a0Portal<\/a>. Therefore, your installer should configure the system accordingly during commissioning.<\/p>\n

Checklist for forecast-based battery charging with the Sunny Home Manager 2.0 in Sunny Portal<\/strong><\/h2>\n

1. Location<\/strong><\/h2>\n

Configuration > PV System Properties > PV System Data<\/strong><\/p>\n

To calculate the expected PV generation, the exact input of the system location (latitude and longitude) and the altitude is required.<\/p>\n

\"PV<\/a><\/p>\n

 <\/p>\n

2. String configuration<\/strong><\/h2>\n

Configuration > PV System Properties > String configuration<\/strong><\/p>\n

The configuration of strings is fundamental for the correct calculation of the PV forecast (expected PV generation curve), especially in case of varying module orientation, and thus the basis for load planning.<\/p>\n

\"String<\/a><\/p>\n

 <\/p>\n

 <\/p>\n

Editing and creating strings:<\/p>\n

\"String<\/a><\/p>\n


\nInfo: <\/strong>PV systems with Tigo optimizers cannot use the “forecast-based battery charging” feature.
\n<\/strong><\/p>\n

With communicative integration of Tigo optimizers in the Sunny Portal system, the forecast-based charging feature cannot <\/u>be used. If you nevertheless intend to use this feature, we recommend monitoring the Tigo optimizer via the Tigo SMART web portal \/ app and refraining from directly integrating it into the Sunny Portal system.<\/p>\n

 <\/p>\n

3. Parameters<\/strong><\/h2>\n

Configuration > PV System Properties > Parameters<\/strong><\/p>\n

The entry of the feed-in tariff valid for the PV system and, if applicable, a self-consumption tariff is fundamental to ensure that the Sunny Home Manager 2.0 can correctly plan in accordance with the selected load\u2019s optimization target (ecological\/economic).<\/p>\n

Background:<\/strong> The optimization of the Sunny Home Manager 2.0 takes place exclusively on the basis of pricing tables (even with an ecological optimization target). If the feed-in tariff is not indicated, the corresponding planning cannot take place.<\/p>\n

Note:<\/strong> In Germany, the self-consumption tariff is only relevant for systems commissioned between January 1, 2009 and April 1, 2012. For all other systems, the self-consumption tariff is \u20ac0.00. The input of the individual electricity production costs or the current electricity price of the electric utility company is not meant here and leads to incorrect price calculations and thus incorrect planning.<\/p>\n

\"Reimbursement\"<\/a><\/p>\n

 <\/p>\n

If the local grid operator requires a limitation of the active power feed-in, this must be specified here (e.g., 70-percent-regulation). The Sunny Home Manager 2.0 uses this information for forecast-based charging to avoid curtailing the system in times of high generation and to use as much self-generated solar energy as possible.<\/p>\n

Note:<\/strong> Ensure that the parameter \u201cOperating mode Active power\u201d is set to the value \u201cAct. power lim. via PV system ctrl\u201d for all inverters.<\/p>\n

\"Limiting<\/a><\/p>\n

 <\/p>\n

The input of the current electricity tariff of the selected electric utility company provides a basis for correct planning in accordance with the optimization target. In addition to the fixed tariff, variable electricity prices (e.g., peak\/ off-peak electricity tariff) can also be configured.<\/p>\n

\"Electricity<\/a><\/p>\n

 <\/p>\n

For each system, either an ecological (maximization of PV self-consumption) or an economic (minimization of energy costs) optimization target must be selected. Depending on the situation (e.g., PV feed-in tariff, electricity procurement costs), the Sunny Home Manager\u2019s planning can vary greatly.<\/p>\n

\"Optimization<\/a><\/p>\n

 <\/p>\n

4. Load Balance and Control<\/strong><\/h2>\n

Load Balance and Control > Configuration > Load characteristics<\/strong><\/p>\n

\"Load<\/a><\/p>\n

 <\/p>\n

\"Load\"<\/a><\/p>\n

 <\/p>\n

The priority of an optional appliance decides in which order the Sunny Home Manager 2.0 considers the individual appliances.
\nOptional appliances are devices or applications whose operation is not absolutely necessary (e.g., operating the washing machine). This is in contrast to necessary appliances, whose operation is mandatory, even if additional grid-supplied power may be necessary in the event of low solar power supply (e.g., ensuring that an electric vehicle is ready for operation).
\nThe slider is relevant for the planning of optional appliances and indicates what minimum share of PV energy or what maximum costs are accepted for these appliances. The Sunny Home Manager 2.0 schedules optional appliances only if it can ensure that the planning target is met. If the slider is set to 100% PV generation, it is possible that, depending on the size of the system, optional appliances cannot be scheduled for use on cloudy days because minimum grid-supplied power cannot be excluded. The slider is relevant for the planning of appliances and indicates what minimum share of PV energy or what maximum costs are accepted for these appliances.<\/p>\n

Recommendation:<\/strong> The priority of appliances with low power (e.g., washing machine and dishwasher) should be lower than, for example, the priority of the SMA EV Charger.<\/p>\n

Recommendation:<\/strong> Set to 95% PV generation and 5% grid-supplied power (depending on the PV system size)<\/p>\n

Note:<\/strong> \u201cSurplus PV energy\u201d corresponds to the curtailed PV energy (in case of active power limitation e.g., 70-percent-regulation).<\/p>\n

\"Load<\/a><\/p>\n

 <\/p>\n

5. Battery prior optional loads<\/strong><\/h2>\n

Configuration > Device Overview > Properties (Sunny Home Manager 2.0)<\/strong><\/p>\n

\"Device<\/a><\/p>\n

 <\/p>\n

\"Sunny<\/a><\/p>\n

 <\/p>\n

With forecast-based battery charging, PV yields can be optimized by avoiding the need for curtailing. In the \u201cRequired state of charge (SoC) for forecast-based charging\u201d field, a particular component of the battery can be excluded from this limitation.
\n
\nNote: <\/strong>Only tick the box for forecast-based battery charging if the active power limitation system is active.
\nBy ticking the box \u201cCharging of battery prior to optional loads,\u201d it is ensured that the battery is charged first, before the Sunny Home Manager considers optional appliances, such as the SMA EV Charger, for PV surplus charging.
\n<\/strong><\/p>\n

\"SMA<\/a><\/p>\n

You now want to do forecast-based battery charging?<\/strong><\/p>\n

Detailed information about this feature and the advantages of forecast-based battery charging can be found in the blog post<\/a>.<\/p>\n

\n